Fel

[BHalley]

Can anyone explain to me the best way to use FEL? I am having a hard time understanding the concepts and the best way to use it with my 10D and 550 EX.

[Editor]

I can explain it to you, but I do not have the time. Maybe someone can give you the basics and I will try to get back to you in the next few days..

I am going to bed!

[kevinrstruck]

EOS cameras (type A) which support E-TTL also support flash exposure lock when used with EX flash units. This feature lets you lock flash settings in, then optionally recompose the image before taking the final photo. This allows you to adjust the flash settings in certain difficult to meter cases. Canon first introduced FEL in 1986 with their T90 camera and 300TL flash, but dropped the feature with the first EOS cameras. It wasn’t until 1995, with the introduction of the Elan II(E)/50/55 and E-TTL, that FEL made its return.

FEL works by issuing a preflash when the AE lock button or, if the camera has one, when the FEL button is pressed. (on most EOS cameras the AE lock and flash exposure features are tied together, but top of the line EOS cameras have separate FEL buttons which allow you to set AE lock and FEL independently) The camera then stores flash exposure data, biased towards either the current focus point or the central focus point, for a 16 second period or for as long as you keep the shutter release pressed halfway. During this time you can recompose the photo or you can adjust the aperture and shutter speed (overriding AE lock, which is set when you press the AE lock button, if you like).

FEL is thus useful for taking photos in which the subject is not covered by one of the focus points or photos containing reflective surfaces which can fool flash metering or certain cases in which the subject is moving. It’s also useful for scenes in which you want to bias the flash exposure to something other than the current focus point. A major drawback with FEL is that the E-TTL preflash occurs when the AE lock or FEL button is pressed, which can confuse your photographic subjects who may think that the photograph is already taken.

If you lock focus on a scene and recompose you will likely have poor flash metering, since E-TTL biases flash metering to the current focus point. Use FEL instead to avoid this problem.

Some cameras have a custom function (CF 8 on the Elan II(E)/EOS 50/55 and Elan 7(E)/EOS 30/33/7) which lets you specify whether you want partial metering and FEL tied to the central focus point - the default - or to the active focus point instead.

[DigitalFreak]

Nice explanation. I always wondered what fel was.

[Editor]

What he said...

EOS cameras (type A) which support E-TTL also support flash exposure lock when used with EX flash units. This feature lets you lock flash settings in, then optionally recompose the image before taking the final photo. This allows you to adjust the flash settings in certain difficult to meter cases. Canon first introduced FEL in 1986 with their T90 camera and 300TL flash, but dropped the feature with the first EOS cameras. It wasn’t until 1995, with the introduction of the Elan II(E)/50/55 and E-TTL, that FEL made its return.

FEL works by issuing a preflash when the AE lock button or, if the camera has one, when the FEL button is pressed. (on most EOS cameras the AE lock and flash exposure features are tied together, but top of the line EOS cameras have separate FEL buttons which allow you to set AE lock and FEL independently) The camera then stores flash exposure data, biased towards either the current focus point or the central focus point, for a 16 second period or for as long as you keep the shutter release pressed halfway. During this time you can recompose the photo or you can adjust the aperture and shutter speed (overriding AE lock, which is set when you press the AE lock button, if you like).

FEL is thus useful for taking photos in which the subject is not covered by one of the focus points or photos containing reflective surfaces which can fool flash metering or certain cases in which the subject is moving. It’s also useful for scenes in which you want to bias the flash exposure to something other than the current focus point. A major drawback with FEL is that the E-TTL preflash occurs when the AE lock or FEL button is pressed, which can confuse your photographic subjects who may think that the photograph is already taken.

If you lock focus on a scene and recompose you will likely have poor flash metering, since E-TTL biases flash metering to the current focus point. Use FEL instead to avoid this problem.

Some cameras have a custom function (CF 8 on the Elan II(E)/EOS 50/55 and Elan 7(E)/EOS 30/33/7) which lets you specify whether you want partial metering and FEL tied to the central focus point - the default - or to the active focus point instead.

[webbrage]

:D Good Job!!!!!